Overview
The Aquadopp Profiler is a highly versatile Acoustic Doppler Current Profiler (ADCP) available in four profiling range options, from < 1 m to > 85 m. The 1 MHz version has a current profiling range of up to 25 m. Designed for simple yet powerful operation, this current profiler is packed with features used by engineers and researchers to enable accurate and effective hydrodynamic data collection in a variety of environmental conditions.
This instrument can also be used to perform river discharge measurements by River Insight.
See the details of the Generation 2 Aquadopp updates in the release notes here.
- Currents
- Waves
Highlights
-
Up to 25 m current profiling range
-
Optional right-angle head
-
Pressure-based (PUV) directional wave measurements
Usage
-
Mean flow measurements with high focus on ease of use and simplicity
-
Projects with needs for both high-resolution and normal-range current measurements
-
Studies of tidal currents
-
Measurements of combinations of waves and currents
-
This instrument is used to perform river discharge measurements by River Insight.
Setup
The 1MHz Aquadopp Profiler, designed for current measurements up to a 25m range, is set up using the Nortek deployment software, enabling users to customize measurement schemes and assess power requirements.
Deployment
Compact size and an optional right-angle head allow for very near-bed deployments, maximizing water column coverage in shallow areas. Teams of all sizes can deploy an Aquadopp Profiler successfully.
Data
Nortek postprocessing software and/or display software is available for review, visualization, and processing of data, after deployment or in real time.
Nominal profiling range* |
25 m |
Cell size |
0.25-4 m |
Maximum number of cells |
200 |
Minimum blanking |
0.2 m |
Velocity range (along beam) |
±1 m/s, ±2.5 m/s, ±5 m/s |
Velocity range (horizontal) |
±2.3 m/s, ±5.75 m/s, ±11.5 m/s |
Accuracy |
±1% of measured value ±0.5 cm/s |
Horizontal Velocity precision** |
Typ. 1cm/s |
Maximum sampling rate (output) |
1 Hz |
Wave measurements |
PUV (optional) |
* Depending on scattering conditions |
|
** Consult instrument SW |
Sampling |
Same as velocity |
Resolution |
0.5 dB |
Dynamic range |
90 dB |
Transducer acoustic frequency |
1 MHz |
Number of beams |
3 (see GA drawings for angles) |
Beam width |
1.7° (3.4° total) |
Maximum profiling range |
8.0 m |
Cell size |
0.02-0.25 m |
Minimum blanking |
0.1 m |
Maximum number of cells |
256 |
Velocity range |
Product of profiling range and velocity should not exceed 0.25 m2/s |
Accuracy |
±1% of measured value ±0.5 cm/s |
Max. sampling rate |
4 Hz |
Temperature: |
|
Temp. range |
-4 to +40 °C |
Temp. accuracy/resolution |
0.1 °C/0.01 °C |
Temp. time response |
<1 min |
Compass: |
Solid State Magnetometer |
Accuracy/resolution |
<2° for tilt <30°/0.01° |
Tilt: |
Solid State Accelerometer |
Accuracy/resolution |
0.2° for tilt <30°/0.01° |
Maximum tilt |
Full 3D |
Up or Down |
Automatic detect |
Pressure: |
Piezoresistive |
Range |
30m/100m/500m |
Accuracy/precision |
0.5% FS / 0.005% of full scale |
Capacity |
16 GB |
Accuracy |
±1 min/year |
Backup in absence of power |
4 weeks |
I/O |
RS-422 (inquire for RS-232) |
Communication baud rate |
9600 Baud-1.2 Mbaud (default 115200 Baud) |
User control |
Nortek Deployment Software or direct ASCII commands, with binary or ASCII data output |
Operating system |
Cross platform |
Functions |
Deployment planning, instrument configuration, data retrieval and conversion. Online data display. |
DC input |
9-24 VDC |
Absolute maximum DC input |
26 VDC |
Maximum peak current |
4.5 A |
Power consumption |
Consult Nortek Deployment Software |
Sleep current |
< 40 uA |
Transmit power |
Adjustable |
Internal Battery capacity |
1-3x 50 Wh (Alkaline), 2-3x 165 Wh (Lithium), 1-3x 76 Wh (Li-Ion) |
Battery weight |
430 g per 50 Wh (Alkaline), 380 g per 165 Wh (Lithium), 300 g per 76 Wh (Li-Ion) |
Operating temperature |
-5 to +40 °C |
Storage temperature |
-20 to +60 °C |
Shock and vibration |
Shock: IEC 60068-2-27, Vibration: IEC 60068-2-64 |
EMC |
EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019 |
Depth rating |
500 m |
Bulkhead (Impulse) |
MCBH-8-FS Brass |
Cable |
PMCIL-8-MP on 5 m (default) polyurethane cable |
POM, Naval Brass, Titanium Gr.5, Epoxy |
Maximum housing diameter |
75 mm |
Maximum length |
S1VP: 589 mm, S1SP: 634 mm |
Weight in air (without batteries) |
S1VP: 2500 g, S1SP: 2710 g |
Weight in water (without batteries) |
S1VP: -120 g, S1SP: -50 g |
Weight in air, short housing (without batteries) |
S1VP: 1900 g, S1SP: 2110 g |
Weight in water, short housing (without batteries) |
S1VP: 330 g, S1SP: 400g |
S1VP |
Shallow water, 1MHz, Vertical orientation, Profiler |
S1SP |
Shallow water, 1MHz, Side looking, Profiler |
Cable length |
0-10m; 10-50m; 50-500m |
Power wire gauge |
20AWG; 20AWG; 18AWG |
Hardware |
Standard; Standard; Long cable kit |
Input voltage |
9-24VDC; 24VDC +/-0,5; 48VDC +2/-5 |
Absolut maximum DC input |
26 VDC; 26 VDC; 51 VDC |
Communication |
RS232/RS422/115200; RS232/RS422/115200; RS422/115200 |
Aquadopp Profiler 2 1MHz
Standard housing for three batteries
Short housing for one battery
16 GB SD card data logger
Pressure sensor, 0-30 m
Pressure sensor, 0-100 m
Pressure sensor, 0-500m
5m PMCIL-8-MP Serial cable for Aquadopp 2
10m PMCIL-8-MP Serial cable for Aquadopp 2
20m PMCIL-8-MP Serial cable for Aquadopp 2
30m PMCIL-8-MP Serial cable for Aquadopp 2
40m PMCIL-8-MP Serial cable for Aquadopp 2
50m PMCIL-8-MP Serial cable for Aquadopp 2
New features, fixes and functionality
The standard deployment software for Nortek Aquadopp, Aquadopp Profiler and AWAC instruments purchased after October 2023.
The software can be launched from your web browser, installed from Microsoft Store or downloaded as an offline installer file.
Post-processing software for Aquadopp Generation 2, AWAC Generation 2, and Signature series instruments.
Set of Anti-fouling patches for Aquadopp
This set is suitable for Aquadopp 300 m, Aquadopp Profiler 1MHz, Aquadopp Profiler 2MHz and Eco
Battery pack, 10-pack, 12 V - 165 Wh, lithium - for use with Aquadopp Generation 2
This battery can be used inside the main canister of your Nortek instrument.
Battery pack, 10-pack, 13.5 V - 50 Wh, alkaline - for use with Aquadopp Generation 2
This slim battery can be used inside the main canister of your Nortek instrument.
Battery pack, 5-pack, 12 V - 165 Wh, lithium - for use with Aquadopp Generation 2
This battery can be used inside the main canister of your Nortek instrument.
Battery pack, 5-pack, 13.5 V - 50 Wh, alkaline - for use with Aquadopp Generation 2
This slim battery can be used inside the main canister of your Nortek instrument.
Battery, 12 V - 165 Wh, lithium - for use with Aquadopp Generation 2
This battery can be used inside the main canister of your Nortek instrument.
Battery, 13.5 V - 50 Wh, alkaline - for use with Aquadopp Generation 2
This slim battery can be used inside the main canister of your Nortek instrument.
Battery, 75Wh Li-ion rechargeable
This small, rechargeable battery can be used in the main canister of your instrument.
Charger for Li-ion batteries
This charger is used to recharge the 75Wh Li-ion batteries.
